top of page

MOTORCYCLES

Warning: Engines must have suggested manufacture break in before using this product

​

Transfusion is formulated for motorcycles and has 7 weight synthetic oil for a base. This 7 weight oil is for when it is applied by itself on external parts which are metal.

 

Transfusion reduces friction like no other product.

​

Transfusion will allow all the moving parts of your engine, transmission, and chains to glide with minimal resistance and wear.

​

​

 

Less friction will improve motion while reducing heat buildup caused by tight tolerance machining.

 

 

Transfusion coats and impregnates the steel components of the motorcycle and eliminates dry starts. Transfusion will not build upon itself and is only looking for metal that is creating heat from friction. Transfusion also has anti-oxidants built in to help coat the inside of the motor, transmission and rear differential to stop the “corrosion” with aluminum caused by humidity etc. Oil changes will not affect the metal parts after being treated with Transfusion (It stays in and on the metal). It is best to use Transfusion after a fresh oil change so the product has plenty of time to make contact as possible. Any Transfusion  that does not find a home at the time of the next oil change will come out with the oil.

​

 

Transfusion contains no solids (Chemical Scrubbers only).

​

 

Transfusion contains NO PTFE (Teflon) or clutch plugging products.

    

​

​

NOTE: Transfusion will NOT change the SAE range of the base lubrication as Transfusion will not dilute the base oil. Transfusion will not alter the viscosity of the base oil which is the main reason for voiding warranties. Transfusion is a pure synthetic which will travel well with any petroleum based product.     

       

 

     This product will not void warranty.

 

 

Transfusion can also be used for:       

 

Clutch Cable

Throttle Cables

Pedal Pivots

Chains

Steering Locks

                Brake Levers               

 Throttle Twist

Hinges on hard case bags

                       

                                               

Dosage is a minimum of 2 oz. per quart of oil to all reservoirs. Removing some oil to make sure proper oil level is maintained might be needed.

​

​

Transfusion would be a superior enhancement to the following high performance vehicles listed below.

​

ATV’s

Snow mobiles

2 stroke

4 stroke

          upper / lower drive units.           

Transfusion Physical Characteristics 

           

                                                                                                 Transfusion        ASTM Method

​

             API Gravity @ 60 F                      28.6                     D 287

           Flash Point, F                             400 F                    D 92

            Pour Point, F                             < - 30 F                  D 97

                                             

                                                 Viscosity

                        SUS @ 100 F                  384                  D 2161

                         SUS @ 210 F                    67                  D 2161

             Viscosity Index                           133                 D 2270

           Sulfated Ash, %                          1.04                 D 874

                                                

                                                 Antioxidant

                                                 Automate Red IK HF

​

        Operating Temperatures   Low -80 F/Max Sustained 350 F /Max Intermittent 400 F

​

​

        D.O.T. Hazard Class      N/A     

  

        No Fire Hazard

​

bottom of page